Heavy chromite sand increases packing density and weight so your bag will stay in place even better. Chromite weighs almost twice as much as regular play sand or birdcage "shell" sand and also packs together.

The Original bag is the most common Edgewood bag used by benchrest shooters. Filled with heavy sand, it weighs between 10 and 14 lbs. depending on body height and has a footprint of about 6 ½'' x 8 ½''. Built with reinforced leather sides and heavy nylon top and ears along with a multi-layered ‘donut’ base which allows the bag to sit firmly on the bench without rocking back and forth.

Body Height: 3 ¼"
Ear Height: 2"
Ear Spread: 3/8"

Requires 5kg of heavy sand.

The Minigater features a larger base than the Original – approximately 6 ½" x 10". When filled with heavy sand, it weighs in somewhere between 13 and 16 lbs. A much longer earbase is stitched to the top of the Mini for smoother tracking, especially when shooting free recoil. The same reinforced sides and donut base are used in this bag as in the Original.

Body Height: 3 ¼"
Ear Height: 2"
Ear Spread: 3/8"

Requires 6kg of heavy sand.

This is a long, heavy bag - about twice the length of the Original ( 6 ½" x 13 ½ “) – the ultimate in stability. Filled weight can easily top 25 lbs. depending on body height. It features a padded top for resting the trigger hand and includes the same choices of ear combination as the Original. The gater has a multi-layered all flat base.

Body Height: 3 ¼"
Ear Height: 2"
Ear Spread: 3/8"

Requires 11kg of heavy sand.

Edgewood Frontbags are constructed much like the rearbags – reinforced leather sides with nylon tops that have a light layer of reinforcing under the nylon between the ears to keep the sand from shifting. If you want heavier reinforcing, we can add another layer, but this is a special order item. Please specify when ordering if you want this extra-heavy reinforcing.

The inside corners of the bag feature sewn-in nylon inserts to prevent leather from rolling under the stock. The bag’s overall fit is unmatched by any other.

Edgewood Frontbags are constructed much like the rearbags – reinforced leather sides with nylon tops that have a light layer of reinforcing under the nylon between the ears to keep the sand from shifting. If you want heavier reinforcing, we can add another layer, but this is a special order item. Please specify when ordering if you want this extra-heavy reinforcing.

The inside corners of the bag feature sewn-in nylon inserts to prevent leather from rolling under the stock. The bag’s overall fit is unmatched by any other.

Farley Front Bags have a hard bottom cut to fit into the front basket. 'Common' Front Bags feature ½" wide leather flaps extending along the bottom edges that you can use to pin down with retaining bars, or the flaps can be punched, notched or cut away all together to custom fit your rest.

Edgewood Bolt Holsters fit Panda, Rem. 700 short, BAT and "most" others with up to a 5" lug. They feature a fold-over snap-top with **Tan Snakeskin (limited to stock on hand), Black, Red, Navy or Green Cordura inlay and a spring clip for fastening to your belt. They are heavy duty and fully lined. Please specify inlay choice when ordering.

The Edgewood Stock Protector is a protective leather cover for your rifle stock which lays over the butt stock to keep solvents and oils off the stock while you are cleaning the rifle. Two 1/4” steel rods are sewn into the side edges of the stock protector to keep it in place on the stock. Made of a single piece of quality leather. Approximately 9-1/2” wide and 12” long.